Re: [Newsletter] Surface Roughness
These links should be of help
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Thomas John
Sent: Tuesday, May 10, 2016 10:35 AM
Subject: [Newsletter] [SI-LIST] Surface Roughness
I would like to know if there is any study out there which explains the
correlation between surface roughness and loss at higher frequencies.
Trying to match the S-parameter from VNA measurements with simulated
measurements and I believe playing around with surface roughness should help me
narrow the gap between the two.
If there are papers/articles out there which explain how to best model surface
roughness without have to do the actual cross section of the board, that will
ckselvaraj 4 years 2 months 25 days